For the treatment to be effective, the EMSCULPT parameters must be at least 7 Tesla.
Our machine is 15 Tesla, so the result is guaranteed. This technology focuses on the muscles, and through working the muscles, it achieves a reduction in fat deposits, while the treated body part becomes much more muscular.
How the technology works: We deliver high-intensity and high-frequency magnetic vibrations to a depth of 8 cm, alternating between contraction and relaxation, resulting in a super-intensive workout.
The technology induces muscle hyperplasia, the growth of collagen fibers, the growth of myofibrils, thus increasing the size and mass of muscle fibers. With this technology, we can load the muscles 100%. For comparison: a strong weight training session means about 30% load on the muscle fibers. To put it in more everyday terms: A 30-minute HIEMT treatment is equivalent to about 20,000 sit-ups. The Hiemt Technology is the world’s officially recognized first buttock lifting procedure.
Additional benefits of HIEMT:
There is a lot of data about the technology. We offer a modest but proven expected result as a consequence of 1 course or 4 treatments:
The latest development. The first machine that combines 3 technologies for maximum and guaranteed effect. HIFEM+EMS(electro-magnetic stimulation) + RF(radiofrequency). On average, it results in 25% more muscle and -30% less fat pads in at least 4 uses. With its unique 15 Tesla strength, it is able to work the muscles. It has FDA certification. It is a popular machine - not by chance - it works the muscles very well. In 30 minutes, the machine does the persistent number of repetitions of several months for you. The treatment results in supramaximal muscle contraction. So with our machine, muscle growth (+25% muscle) + fat burning (-30% fat) + faster metabolism (500%) = so a much better figure is guaranteed!
30 minutes with our machine = 24,000 squats or abdominal exercises !!!
If we have piqued your interest, check out our treatments and prices.
If we have piqued your interest, check out our treatments and prices.
HIFU = High Intensity Focused Ultrasound
For detailed information, come to us and our specialists will present the technology and the expected results in detail.
The history of HIFU: The technology was developed by medical science to destroy smaller cancerous tumors. Then the technology began to be refined so that it could also be used in the beauty industry, and thus at a much lower energy level it became suitable for firming and lifting the face.
From 2010, the technology became the luxury treatment of non-invasive procedures. The HIFU technology was made unbeatable among non-invasive procedures by the depth and precision of the treatment.
During the treatment, sound waves of a frequency inaudible to the human ear come from the machine’s treatment head into the skin, which generates heat. Thanks to the thermal energy, thermal coagulation zones, points are created. This is how we induce our skin’s dermis layer to produce collagen. This collagen production lasts from about a month to 10 weeks after the treatment. So the result of the treatment is not immediately visible, you have to wait a little for the amount of collagen production to be clearly visible. The effect of the focused ultrasound raises the temperature of the deeper layers of the skin to 60-70 degrees Celsius in the deeper layers of the skin, so it does not burn the skin surface. Due to the deeper effect, not only are the surface wrinkles reduced, but the support of the skin is also restored.
The process of the technology:
Why is HIFU technology unique?
Results of HIFU technology:
Our machine is a 5th generation 8D!!! 11-line, European-made, very precise facial rejuvenation device.
Also tested by doctors. It shoots 11 very precise lines in quick succession. This reduces the 2.5-hour treatment of older models to 1 hour with our device. Due to the dense lines, a lot of shots get into the skin, so the result is guaranteed. The precisely
Results of microneedle radiofrequency:
Our machine is a 5th generation 8D!!! 11-line, very precise facial rejuvenation device, manufactured in Europe.
Tested by doctors. It shoots 11 very precise lines at once in rapid succession. This reduces the 2.5-hour treatment with older models to 1 hour with our device.
Due to the dense lines, a lot of shots are injected into the skin, so the result is guaranteed. Due to the precisely placed lines, the result is certain and the risk is minimal.
Source: Medical News Today
https://www.medicalnewstoday.com/articles/hifu-facial#summary
According to the American Board of Cosmetic Surgery, nonsurgical ultrasound treatments like HIFU:
are effective in tightening skin on the neck
improve sagging jowls
lift drooping eyelids and eyebrows
smooth out wrinkles on the face
remove wrinkles and tighten skin on the chest
The type of ultrasound used in this procedure is different from the ultrasound that doctors use for medical imaging. HIFU uses high-energy waves to target specific areas of the body.
Specialists also use HIFU on cancer patients, but for much longer, more intensive treatments.
Many reports suggest that HIFU facial treatments work well. A 2018 review looked at 231 studies on the use of ultrasound technology. After analyzing studies on ultrasound skin tightening, body contouring, and cellulite reduction, researchers concluded that the technique is safe and effective.
The American Board of Cosmetic Surgery states that ultrasound skin tightening typically produces positive results within 2 to 3 months, and good skin care can maintain these results for up to 1 year.
A study examining the effectiveness of HIFU facials in Korean people found that the procedure improved the appearance of wrinkles around the jaw, face, and mouth the most. Researchers compared standardized photographs of participants before treatment with 3 and 6 months after treatment.
Another study evaluated the effectiveness of HIFU facials after 7 days, 4 weeks, and 12 weeks. After 12 weeks, participants’ skin elasticity significantly improved in all treated areas.
Other researchers studied the experiences of 73 women and two men who underwent HIFU facials. Doctors who evaluated the results reported an 80% improvement in the skin of the face and neck, while participants were 78% satisfied.
There are a variety of HIFU devices on the market. One study compared the results of two different devices by asking clinicians and people who had undergone HIFU facials to rate the effects. Although participants reported differences in pain levels and overall satisfaction, the researchers concluded that both devices were effective in tightening the skin.
Side effects
In general, evidence suggests that HIFU facials have few side effects, although some people may experience pain and discomfort immediately after the procedure.
The South Korean study concluded that the treatment had no serious side effects, although some participants reported swelling, numbness, redness, bruising, and a purple rash.
In another study, researchers found that while some people who received HIFU treatment on their face or body reported pain immediately after the treatment, none reported any pain after 4 weeks.
Another study found that 25.3% of participants had pain after the procedure, but this improved without any intervention.
Cost
The American Society of Aesthetic Plastic Surgery states that the average cost of a non-surgical skin tightening procedure such as HIFU was $1,707 (619,000 HUF) in 2017.
However, the cost of HIFU treatments varies depending on the location and number of sessions.
Summary
High-intensity focused ultrasound facials, or HIFU facials, can be an effective way to minimize the signs of aging.
As a non-surgical technique, HIFU requires less recovery time than a surgical facelift, but the results will not be as noticeable. However, researchers have found that the procedure tightens sagging skin, smoothes wrinkles, and improves skin texture.
With good aftercare, the benefits of a HIFU facial can last for about 1 year.
Additional clinical study:
- Medical Laser Journal
What is a laser?
A laser is a light source that uses induced emission to create a coherent beam of light. The characteristics of laser light are: the phase of the waves is the same at every cross-section of the beam, it is coherent in space and time, the laser beam is very narrow, with a very small scattering angle, its strength can be many times that of conventional light, the direction of the magnetic field of the emitted waves is constant, it consists of almost a single wavelength component.
Due to these characteristics, laser technology is excellent for:
hair removal
fat reduction
circumference and cellulite reduction
skin rejuvenation, skin peeling, removal of skin defects, stretch marks
reduction of excess skin after weight loss
Lipolaser working principle:
During lipolaser treatment, the laser “penetrates” the fat tissue, and a temporary pore is created on the fat cell through the interaction of the cytochrome oxidase enzyme. The water, glycerol and fatty acids that make up the fat cells leave the fat cell through the pore. These leave the space between the cells and then enter the lymphatic system, where the triglycerides are converted into unsaturated fatty acids during the processes of the lymphatic system. The fatty acids reach the lymph nodes through the lymphatic system, where they are broken down by filtering through mast cells. The body uses this as an energy source.
So the size of our fat cells is significantly reduced, thereby reducing size and reducing cellulite. It is very important after laser treatments that the released fat goes to the lymph nodes where it is converted into unsaturated fatty acids. Therefore, “exhaustion” is very important after every lipolaser treatment. The easiest way to achieve this is with a lymphatic massage.
Advantages of lipo laser technology:
Our machine is a 6D machine with 6 wavelengths, 528 Mitsubishi laser diodes deliver 350mW of laser energy per diode. So it is super powerful and super reliable. The latest development, there is currently no more powerful, more effective machine than this, there are not many such machines in the country. Guaranteed reduction of adipose tissue size.
Radiofrequency skin tightening and fat reduction technology has been used in medicine for over 30 years. It is one of the safest and most effective technologies.
RF working principle:
Radiofrequency generated by electric current creates a thermal effect when it encounters tissues with high alternating current resistance deep in the dermis and subcutaneous fat layer. This 3-dimensional heating effect causes collagen denaturation in the dermis, remodeling and shortening of the tissue. Ultimately, these effects lead to an improvement in skin elasticity without changing the skin surface. Fibroblast cells (which continuously produce collagen and other proteins. As we age, the activity of fibroblasts decreases, thereby reducing collagen production) heated by radiofrequency contribute to firmer, more elastic, and more vibrant skin.
It is also an excellent method for permanently eliminating fat pads and cellulite left after a weight loss program. Radiofrequency heats up fat cells and through the walls of the opened cells, the fat enters the connective tissue and then the lymphatic system, and finally exits through the excretory system. Therefore, the treatment-like use of radiofrequency effectively reduces fat pads, the appearance of cellulite effectively improves, and the skin is renewed. There are monopolar, bipolar, tripular, quadrupolar and multipolar devices.
The difference is how many electrode heads the radiofrequency flows between, and this determines the depth of the radiofrequency during the treatment. Multipolar RF delivers and controls RF energy more efficiently and provides more even heat distribution, which reduces the risk of possible epidermis burns and thus makes cooling the area unnecessary.
Advantages of radiofrequency treatment:
Our machine: several of our machines have a radiofrequency treatment unit, and there are also machines that combine it with other technologies, so we will not go into detail here.
Operating principle: 2 mHz monopolar radio frequency penetrates the skin and creates a high temperature in a wide band. The treatment heads continuously monitor and keep the fat cells at 45 degrees Celsius, which die.
Dead fat cells leave the body within 12 weeks. The average effectiveness of the technology is -24% of the number of fat cells.
So, fat cells die with this technology. According to studies in Kilinka, this achieved the highest average reduction in fat tissue ~24% minus.
Our machine: Latest Luxury model. The Sculpt machine has EMS technology that specifically strengthens the muscles.
For example, a Toka treatment only takes 5-10 minutes!
Facial analysis machine with AI function and treatment recommendation.
Our machine analyzes and then evaluates the results. It analyzes deep skin problems. The AI function simulates how your skin will look 5-10-20-30 years later. It shows how your skin will look, how it will age.
An analysis takes only 10 minutes. 4 light sources illuminate the face, on which it analyzes and scores 6 skin problems. It takes 10 different images of the skin and skin problems, such as deep pigment spots, texture, acne, inflammation, superficial pigment spots, wrinkles. It takes 35 million pixels of images.
It gives recommendations for possible treatments and products to use based on the analysis. And the bonus function is the AI, which shows how you will age if you do nothing with your facial skin.
Vacuum treatment is a technology known for 3000 years, but in the past it was called cupping. Today it is much simpler and easier to do it with machines. Thanks to the stretching and suction effect of the vacuum, the membrane of a significant part of the fat cells becomes permeable, so the accumulated fat flows out and enters the lymphatic circulation. The vacuum activates the elastic fibers, the connective tissue cells that produce it, so the skin becomes firmer. The increased blood flow caused by the vacuum improves the metabolism of the connective tissue, thus increasing the detoxification of the skin. With regular use, collagen production also improves, which results in further tightening of the skin. The effect of the vacuum is vasoconstrictive for a short time, and its longer-term effect is vasodilating.
Since the vacuum stimulates blood flow, the breakdown and removal of deposited waste products is accelerated. The pulsating vacuum compresses the subcutaneous tissues and this pulsating compression increases the elasticity of the skin and thus creates an even skin tone.
As a result of longer, repeated treatment, histamine is released, which improves the permeability of the vascular wall. Vacuum therapy also reduces the level of prostaglandins responsible for the development of pain, and the stimulation of sensory nerves with the pain-relieving compound triggers their operation. Therefore, this technology is effective not only for eliminating wrinkles, but also for smoothing other layers of body surface fat. A larger amount of oxygen and nutrients reaches the treated areas and the released toxins are transported faster.
Therefore, in addition to the aesthetic effects, vacuum treatment is also effective in the following:
Our machine:
Combines 4 technologies at once.which combines vacuum technology with radio frequency, lipolaser and roller technology. Super powerful, modern machine. Guaranteed effect. If someone wants to get only vacuum treatment, then the radio frequency can be turned off on the machine (but why?)
An alternative to liposuction. New fat cells do not form in place of the destroyed ones. Therefore, the chance of fat regain in the treated area is reduced. Its advantage compared to liposuction is that with the same results, there are no complications, fewer contraindications and it is significantly cheaper.
This technology is known to almost everyone, and we have already discussed the use of lasers in the cosmetic industry on our website, so we will only briefly write about the technology.
For effective hair removal, the laser must damage one or more growth centers of the hair: the pluripotent cells of the bulge, the dermal papilla, and the hair matrix must be treated in the anagen phase. In the anagen phase, the structure responsible for hair production can be damaged. If the effect does not occur in this phase, the hair will most likely grow back. Of course, at any given moment, the cells are in a different phase, so there will be hair that will grow back and there will be hair that will not – because the treatment was performed in the anagen phase. The anagen phase has a variable length: For example: 85% of the hair on the scalp is in the anagen phase, in the armpits it is 30%, on the legs it is only 20%. In order to achieve long-term hair removal, it is essential to destroy the structures responsible for hair growth: the bulge and the bulb.
The working mechanism of the diode laser:
The aim is to damage the hair follicle while sparing the epidermis. The basis of laser-based systems used in hair removal is selective photothermolysis. Based on this principle, selective thermal destruction of the target occurs if a sufficient amount of energy is delivered at a wavelength that is well absorbed by the “target”.
Therefore, it is very important to understand the quality of treatment we receive in terms of the performance of the machines, this is directly related to the success of our hair removal. Energy refers to the number of photons delivered and is measured in joules ( J ). Power is measured in watts ( W ), which refers to the rate of energy delivery ( 1W = 1J/s). Flux, energy density is the total energy delivered per unit area in J/cm2. The pulse length shows the amount of time of the applied laser energy (ns,ms). The unit of measurement for pulse frequency is HERZ (1 Herz= 1puls/s). The unit of measurement for wavelength is nanometer, which refers to the distance between the peaks of the light waves.
All of these are important to reach the area with the laser at the ideal depth, with the ideal pulse length, and with the ideal energy and energy density and to eliminate hair growth. – while not wanting to damage the skin.
The longer the wavelength, the deeper the laser penetrates the skin. (It is important to know that not all of our hair follicles are at the same depth, e.g.: scalp 3-5mm, mustache 1-2mm, bikini line 3-4mm). So weaker machines will not damage the hair follicle, because the appropriate amount of energy reaches 4mm deep.
So our hair will definitely grow back on the treated surface.
The outcome of the treatment is influenced by the following: Laser parameters (Wavelength, Flux, Treatment aperture size, Pulse length, Skin cooling system), Skin phenol type, hair characteristics, hormonal characteristics, etc.
Depending on all of these, 6-10 treatments are required in the first year, and then it can be maintained with annual follow-up treatments.
Development of 2024, a quatrowave (treats at 4 wavelengths: 1064nm+808nm+755nm+940nm)) diode laser machine, with a maximum power of 3000W, FDA and Medical CE certification, working at a frequency of 20Hz - supplemented with the ExtraSpeed system, so you can work with it very quickly, a 12x36mm treatment opening much larger than the market average, thus less time is needed to fully treat a body part, and the comfort of the treatment is ensured by an extra effective cooling system, giving the skin a -15 degree cooling through the treatment head. A uniquely effective device. Plus, the machine has a special camera with which we can see the result of the treatment. Also, a new application has been added to the functions of the device, which is the special pore tightening treatment.
We have already written more about radiofrequency on our website (see HERE ). This treatment is a needle radiofrequency technology.
How needle radiofrequency works: It is also called collagen induction therapy.
During the treatment, a set of tiny, finely resonating needles exert a pressure-microtrauma effect in the dermis layers of the skin. In addition to preventing bleeding, this initiates cell colonization in the dermis fiber, which radiofrequency helps with heat and further enhances colonization. Fibroblast cells initiate the production of collagen fibers with high water-binding capacity at the site of micro-injuries. Rejuvenation begins in the treated area due to cell colonization by macrophage activity, which makes the treated area visibly firmer and fuller.
So the mechanism: by delivering RF energy at the end of the needles, it generates heat in a 20-micron target area, thereby creating thermo-injuries, which our body heals by initiating and intensifying the production of collagen and elastin, making the skin firmer and more revitalized.
Cosmetic problems that can be treated with collagen induction therapy:
Lightening of deep wrinkles
Eliminating stretch marks and obesity scars
Treatment of atrophic scars (e.g., skin depressions at the site of acne, depressions after chickenpox)
Treatment of sagging, flabby skin on the entire body.
Treatment of large pores
Treatment of sun-damaged, dull skin
Aging, flabby skin
Seborrheal skin
Tightening of the buttocks
Cellulite
Promoting the delivery of active ingredients
Treatment of acne, scars, surgical scars
Additional benefits:
Minimal skin damage due to ultra-thin needles and the 100% perpendicular penetration angle.
Minimal pain
Guaranteed sterile treatment, as the treatment heads are replaceable, so each guest can be individually sterilised
The strength of the treatment can be adjusted to suit the thickness of the skin.
Due to the size of the treatment head, even very difficult-to-reach areas can be treated easily.
As a result of the treatment, the active ingredients are better absorbed. Cosmetics are more effective.
An unbeatable vacuum-equipped microneedle radiofrequency machine with 50W power. (An improved version of Infinity, Vivace, Scarlet machines with vacuum) Our vacuum-equipped machine improves effectiveness by 65%, reduces pain, and provides more precise needle penetration.
For those who are averse to needles, we can treat their facial skin all year round with the Thermage solution.
Hydrospa – A skin surface renewing, preparing and nourishing treatment in one. Hydrodermabrasion is one of the most effective procedures of our time, where we use an acidic solution to rework the guest’s skin, wash away impurities in the pores, remove dead skin cells, stimulate the deeper layer and hydrate and tighten it. All this within one treatment, using the special VORTEX technology.
Ultrasonic active ingredient delivery – Filling the skin with active ingredients is a basic pillar of cosmetic treatments, we easily deliver either hydrophilic or lipophilic substances into the skin
Radiofrequency tightening – We will be able to generate heat up to the dermis layer in order to increase the guest’s collagen level!
Microcurrent face-lifting – Completely natural bio microcurrent face-lifting technology, with which we can tone the muscles of the facial skin completely safely and effectively
Oxytech procedure – The latest carbon dioxide peeling, deep cleansing, oxygenation, active ingredient replacement and deep hydration! Oxytech is a special procedure that, similar to hydrospa treatments, can stimulate the guest’s skin in multiple layers and with multiple levels of effectiveness, in as little as 1 hour!
Cold therapy – A procedure that is perfect for treating swelling, relieving redness, and tightening pores! It is often used as a closing treatment, to soothe, and reduce irritation.
Active ingredient gun – With the help of enriched oxygen, the high-purity active ingredient can now be delivered to a deeper layer, so that the treatment of problematic or possibly contraindicated guests can also be solved! The active ingredient gun can be used in many cases, a non-invasive, completely natural intervention!
PDT light therapy (Photodynamic light therapy): Effectively regenerates the skin, blurs fine wrinkles, pigment spots, reduces pore size, whitens the skin and stimulates blood circulation.
HF Electrode: With the help of a high-frequency electrode, it kills most of the bacteria and fungi naturally. Very effective and drug/chemical free. Excellent for treating existing Acne and preventing new ones.
Areas of application:
1. Preparation
2. Cleansing
3. Exfoliation
4. Surface restructuring
5. Cell stimulation
6. Collagen remodeling
7. Stabilization of fiber structure
8. Elimination of toxins
9. Enhancement of microcirculation
10. Reduction of inelasticity
11. Skin toning
12. Tightening, lifting
13. Hydration, nutrition
14. Delivery of active ingredients
15. Calming
16. Pore tightening
17. Enhancement of circulation
18. Oxygenation
19. Enhancement of skin respiration
20. Reduction of inflammatory processes
With the 7in1 facial skin restructuring device, we can now provide a uniquely versatile treatment! The device contains all the world innovations of 2019, whether it's hydrospa or oxytech completely natural treatments! Skin renewal, preparation, nourishment and maximum hydration!
In the past, only electromagnetic stimulation strengthened the facial muscles, but today, thanks to the development of technology, this technology is combined with radio frequency in order to restore the facial contour quickly and maximally.
Electromagnetic facial muscle stimulation achieves structural changes through maximum muscle contractions.
It triggers the renewal of myofibrils and protein synthesis, restoring the entire facial muscles. It stimulates the fascia, thus increasing the support of the tissues – lifting them. It acts 20mm deep.
Monopolar RF reaches 40-42 ° C deep in the tissue, which heat causes small injuries in the collagen fibers. This activates fibroblasts, collagen and elastin production starts, and the connective tissue is remodeled.
The combined technology is a real substitute for botox and other fillers!
RF – synchronized special monopolar RF, which deeply heats the tissues and stimulates
collagen production
EMS- High-intensity EMS, i.e. electrostimulation, which lifts the muscles and thus lifts the skin. Synergistic, mutually reinforcing effect = Outstanding results!
Advantages of the technology:
20-minute treatments
Significant improvement in skin tone
4-6 treatments are required once a week, depending on the severity of the problem
American technology, already FDA certified
Free of foreign substances
Preserves bone density
Simultaneously affects muscles and connective tissue
A completely new realis alternative to botox and fillers!
The combined use of RF and EMS is a clinically proven extremely effective procedure!
A 6-output device, meaning the entire face and neck can be treated at the same time. A modern machine that simultaneously stimulates collagen production and works against muscle atrophy. This greatly improves the appearance of fine lines and wrinkles.
EMS (Electrical Muscle Stimulation) electrical impulses directly stimulate deep muscles, fooling our body’s natural reactions, thereby working almost 100% of our muscles.
EMS is a completely safe form of training that has long been used for medical and rehabilitation purposes.
EMS technology is integrated into a suit, so it fits perfectly to the body surface to be worked on.
Another distinguishing feature of LFfitMe is that it can strengthen 16 muscles at the same time and burn fat, as well as speed up basal metabolism. Meanwhile, the suit works the whole body while being comfortable to wear and relaxing.
The intensity of the treatment can even be adjusted by the guest himself, via a light tablet, so he can enjoy achieving his Best Form in a completely private way.
